The control of the DDP is done by a single “click & rotate” encoder with ergonomic, logical operation.

1) Input section:
This section features channel-dependent gain control and mute function.
It also provides a signal routing matrix for configuring signal distribution over the 2 channels (input selection: input 1 or input 2 individual; input 1 > input 2; input 2 > input 1; input 1 > inputs 1+2; input 2 > inputs 1+2, inputs 1+2 > input 1, inputs 1+2 > input 2).

2) System Drive section:
This section provides system controlling and optimizing, with presets for all available Alcons systems and system configurations. Simply select the correct speaker and speaker configuration and all parameters are set to give the best sonic performance; Protection, dedicated filtering, optimised system response.

The Intelligent Driver Guidance IDG™ processing offers optimized power response through "True-RMS" intelligent power limiting guidance and (separate) excursion limiting guidance.

Crossover filtering is done with “Von Helsing’s Filterslope Architecture”; This filter design protocol consists of dedicated, hybrid Bessel, Butterworth or Linkwitz Riley responses.

The optimization of the system’s response is taken care of by factory-set dedicated driver alignment and system configuration equalising a.o.

3) User control section:
This sections offers user definable equalising and delay functions.

The equalising can be done through 4-bands of parametric equalising per channel; Each band provides +12dB to - 19dB gain with a choice of 83 selectable frequencies. Each band can also act as notch-filter. The filters feature CSQ™ (Constant & Symmetrical Q), with a selectable Q from 0.3 to 15, in 36 steps.

Per channel there’s also a user-definable delay function; The delay can be set from 1 to 294ms. for a total of 99.9m/ 328ft. delay

Up to 99 user-presets can be made, consisting of factory system preset, gain, input-mode, equalising and delay, or a selection of each of these functions. The presets can be tagged with a 21-character name.

Apart from the three processing sections, another important feature is the LimitLog™. In combination with the internal crystal-controlled daytime clock, this function provides real-time signal logging; A visual tracing report on the signal present and dB limiting of the selected system, over the elapsed period of time.

With up to 420.000 minute samples, a usage history of more than 7.000 operating hours can be read out.

Furthermore, the DDP is fitted with a wide-angle view backlit LCD; The large display of 128x64 dots, enables a complete processor status report with just a single view.
The display can be configured for 10-seconds Time-out, or 9-level Dimmer-mode; The display also features a 9-step contrast control.

Firmware updates are performed via the side-located USBport; Dedicated boot-loader software makes the firmware updates internet-downloadable.